Feed Back
apnibike.com apnigari.com
BMW_R-1200-RT-P R 1200 RT-P

Technical Specification

Engine

Type Air/oil-cooled flat twin ('Boxer') 4-stroke, one camshaft and four valves per cylinder, central balancer shaft
Bore x stroke 101 mm x 73 mm
Capacity 1,170 cc
Rated output 81 kW (110 hp) at 7,500 rpm
Max. torque 115 Nm at 6,000 rpm
Compression ratio 12.0 : 1
Mixture control / engine management Electronic intake pipe injection/BMS-K digital engine management with overrun fuel cut-off, twin-spark ignition
Emission control Closed-loop 3-way catalytic converter, emission standard EU-3

Performance / fuel consumption

Maximum speed Over 200 km/h
Fuel consumption per 100 km at constant 90 km/h 3.6 l
Fuel consumption per 100 km at constant 120 km/h 4.8 l
Fuel type Unleaded premium, octane rumber 98 (RON), automatic knock control permits operation with minimum octane number 95 (RON).

Electrical system

Alternator three-phase alternator 720 W
Battery 12 V / 19 Ah, maintenance-free

Power transmission

Clutch Single dry plate clutch, hydraulically operated
Gearbox Constant mesh 6-speed gearbox with helical gear teeth
Drive Shaft drive

Chassis / brakes

Frame Two-section frame consisting of front and rear sections, load bearing engine-gearbox unit
Front wheel location / suspension BMW Motorrad Telelever; stanchion diameter 35 mm, central spring strut
Rear wheel location / suspension Cast aluminium single-sided swing arm with BMW Motorrad Paralever; WAD strut (travel-related damping), spring pre-load hydraulically adjustable (continuously variable) at handwheel, rebound damping adjustable
Suspension travel front / rear 120 mm / 135 mm
Wheelbase 1,485 mm
Castor 116 mm
Steering head angle 63.8°
Wheels Cast aluminium
Rim, front 3.50 x 17"
Rim, rear 5.50 x 17"
Tyres, front 120/70 ZR 17
Tyres, rear 180/55 ZR 17
Brake, front Twin disc, floating brake discs, 320 mm diameter, four-piston fixed calipers
Brake, rear Single disc brake, diameter 265 mm, double-piston floating caliper
ABS BMW Motorrad Integral ABS (part-integral)

Dimensions / weights

Length 2,230 mm
Width (incl. mirrors) 905 mm (incl. panniers: 980 mm)
Height (excl. mirrors) 1,430 mm
Seat height, unladen weight 820 / 840 mm (low seat: 780 / 800 mm)
Inner leg curve, unladen weight 1,880 / 1,920 mm (low seat: 1,800 / 1,840 mm)
Unladen weight, road ready, fully fuelled 1) 259 kg
Dry weight 2) 229 kg
Permitted total weight 495 kg
Payload (with standard equipment) 236 kg
Usable tank volume 27.0 l
Reserve approx. 4.0 l
1) According to guideline 93/93/EWG with all fluids, fuelled with at least 90% of usable tank volume
2) Unladen weight without fluids
Pictures
a
a
a
a
a
a
a
..aa
 
ęCopyright 2009-2012, ApniBike.com, All rights reserved.
Web Design and Development by MechTechnologies