Feed Back
apnibike.com apnigari.com
BMW_K-1200-LT K 1200 LT

Technical Specification

Engine

Type Water-cooled, 4-stroke in-line four-cylinder, two camshafts, four valves per cylinder
Bore x stroke 70.5 mm x 75 mm
Capacity 1,171 cc
Rated output 85 kW (116 hp) at 8,000 rpm
Max. torque 120 Nm at 5,250 rpm
Compression ratio 10.8 : 1
Mixture control / engine management Electronic intake pipe injection/BMW engine management, Motronic MA 2.4 with overrun fuel cut-off
Emission control Closed-loop 3-way catalytic converter, emission standard EU-3

Performance / fuel consumption

Maximum speed over 200 km/h
Fuel consumption per 100 km at constant 90 km/h 4.3 l
Fuel consumption per 100 km at constant 120 km/h 5.7 l
Fuel type Unleaded super, minimum octane rating 95 (RON)

Electrical system

Alternator three-phase alternator 840 W
Battery 12 V / 19 Ah, maintenance-free

Power transmission

Clutch Single dry plate clutch, hydraulically operated
Gearbox Constant mesh 5-speed gearbox (overdrive) plus additional reversing aid
Drive Shaft drive

Chassis / brakes

Frame Bridge-type frame, cast aluminium, engine with vibration-decoupled mountings
Front wheel location / suspension BMW Motorrad Telelever; stanchion diameter 35 mm, central spring strut
Rear wheel location / suspension Cast aluminium single-sided swing arm with BMW Motorrad Paralever; central spring strut, spring pre-load hydraulically adjustable (continuously variable) at handwheel
Suspension travel front / rear 102 mm / 130 mm
Wheelbase 1,627 mm
Castor 117 mm
Steering head angle 63.0°
Wheels Cast aluminium
Rim, front 3.50 x 17"
Rim, rear 5.00 x 17"
Tyres, front 120/70 ZR 17
Tyres, rear 160/70 ZR 17
Brake, front Twin disc, floating brake discs, diameter 320 mm, 4-piston fixed calipers
Brake, rear Single disc, floating brake disc, diameter 285 mm, four-piston fixed caliper
ABS Standard equipment: BMW Motorrad Integral ABS (fully integral)

Dimensions / weights

Length 2,502 mm
Width (incl. mirrors) 1,080 mm
Height (excl. mirrors) 1,395 mm (with aerial: 1,915 mm)
Seat height, unladen weight 770 / 800 mm
Inner leg curve, unladen weight 1,860 / 1,920 mm
Unladen weight, road ready, fully fuelled 1) 387 kg
Dry weight 2) 353.5 kg
Permitted total weight 600 kg
Payload (with standard equipment) 213 kg
Usable tank volume 24 l
Reserve approx. 4.0 l
1) According to guideline 93/93/EWG with all fluids, fuelled with at least 90% of usable tank volume
2) Unladen weight without fluids
Pictures
a
a
a
a
..aa
 
ęCopyright 2009-2012, ApniBike.com, All rights reserved.
Web Design and Development by MechTechnologies