Feed Back
apnibike.com apnigari.com
BMW_K-1200-GT K 1200 GT

Technical Specification

Engine

Type Water-cooled 4-stroke in-line four-cylinder, two camshafts, four valves per cylinder
Bore x stroke 79 mm x 59 mm
Capacity 1,157 cc
Rated output 112 kW (152 hp) at 9,500 rpm
Max. torque 130 Nm at 7,750 rpm
Compression ratio 13.0 : 1
Mixture control / engine management Electronic intake pipe injection/digital engine management including knock sensor (BMS-K)
Emission control Closed-loop 3-way catalytic converter, emission standard EU-3

Performance / fuel consumption

Maximum speed Over 200 km/h
Fuel consumption per 100 km at constant 90 km/h 4.8 l
Fuel consumption per 100 km at constant 120 km/h 5.8 l
Fuel type Unleaded premium, octane number 98 (RON), automatic knock control permits operation with minimum octane number 95 (RON)

Electrical system

Alternator three-phase alternator 945 W
Battery 12 V / 19 Ah, maintenace-free

Power transmission

Clutch Multiple-disc clutch in oil bath, hydraulically operated
Gearbox Constant mesh 6-speed gearbox
Drive Shaft drive

Chassis / brakes

Frame Bridge-type frame, cast aluminium, load-bearing engine
Front wheel location / suspension BMW Motorrad Duolever; central spring strut
Rear wheel location / suspension Cast aluminium single-sided swing arm with BMW Motorrad Paralever; central spring strut with lever system, spring pre-load hydraulically adjustable (continuously variable) at handwheel, adjustable rebound damping
Suspension travel front / rear 115 mm / 135 mm
Wheelbase 1,572 mm
Castor 120 mm
Steering head angle 60.8°
Wheels Cast aluminium
Rim, front 3.50 x 17"
Rim, rear 5.50 x 17"
Tyres, front 120/70 ZR 17
Tyres, rear 180/55 ZR 17
Brake, front Twin disc, floating brake discs, diameter 320 mm, 4-piston fixed calipers
Brake, rear Single disc, diameter 294 mm, double-piston floating caliper
ABS Standard equipment: BMW Motorrad Integral ABS (part-integral)

Dimensions / weights

Length 2,318 mm
Width (incl. mirrors) 965 mm (incl. panniers: 990 mm)
Height (excl. mirrors) 1,438 mm
Seat height, unladen weight 820 / 840mm (low seat: 800 / 820mm)
Inner leg curve, unladen weight 1,800 / 1,840 mm (low seat: 1,760 / 1,800 mm)
Unladen weight, road ready, fully fuelled 1) 282 kg
Dry weight 2) 249 kg
Permitted total weight 520 kg
Payload (with standard equipment) 238 kg
Usable tank volume 24 l
Reserve approx. 4.0 l
1) According to guideline 93/93/EWG with all fluids, fuelled with at least 90% of usable tank volume
2) Unladen weight without fluids
Pictures
a
a
a
a
a
a
..aa
 
ęCopyright 2009-2012, ApniBike.com, All rights reserved.
Web Design and Development by MechTechnologies