Feed Back
apnibike.com apnigari.com
BMW_HP2-Enduro HP2 Enduro

Technical Specification


Type Air/oil-cooled flat twin ('Boxer') 4-stroke, one camshaft and four valves per cylinder
Bore x stroke 101 mm x 73 mm
Capacity 1,170 cc
Rated output 77 kW (105 hp) at 7,000 rpm
Max. torque 115 Nm at 5,500/min
Compression ratio 11.0 : 1
Mixture control / engine management Electronic intake pipe injection/BMS-K digital engine management with overrun fuel cut-off, twin-spark ignition
Emission control Closed-loop 3-way catalytic converter, emission standard EU-3

Performance / fuel consumption

Maximum speed 200 km/h
Fuel consumption per 100 km at constant 90 km/h 4.1 l
Fuel consumption per 100 km at constant 120 km/h 5.5 l
Fuel type Unleaded premium, octane number 98 (RON), automatic knock control permits operation with minimum octane number 95 (RON).

Electrical system

Alternator three-phase alternator 600 W
Battery 12 V / 12 Ah, maintenance-free

Power transmission

Clutch Single dry plate clutch, hydraulically operated
Gearbox Constant mesh 6-speed gearbox with helical gear teeth
Drive Shaft drive

Chassis / brakes

Frame Tubular steel space frame
Front wheel location / suspension WAD upside-down front fork, Ø 45 mm, compression damping continuously adjustable in two ranges, rebound damping adjustable
Rear wheel location / suspension Forged aluminium single-sided swinging arm with BMW Motorrad Paralever; Air Damping System, spring pre-load and damping continuously adjustable by means of air pressure
Suspension travel front / rear 270 mm / 250 mm
Wheelbase 1,625 mm
Castor 157 mm
Steering head angle 57.5°
Wheels Cross-spoke
Rim, front 1.85 x 21"
Rim, rear 2.50 x 17"
Tyres, front 90/90 - 21
Tyres, rear 140/80 - 17
Brake, front Single disc, diameter 305 mm, double-piston floating caliper
Brake, rear Single disc, diameter 265 mm, double-piston floating caliper

Dimensions / weights

Length 2,350 mm
Width (incl. mirrors) 880 mm
Height (excl. mirrors) 1,266 mm
Seat height, unladen weight 920 mm (low seat: 895 mm)
Inner leg curve, unladen weight 1,980 mm (low seat: 1,930 mm)
Unladen weight, road ready, fully fuelled 1) 195 kg
Dry weight 2) 175 kg
Permitted total weight 380 kg
Payload (with standard equipment) 185 kg
Usable tank volume 13.0 l
Reserve approx. 2.0 l
Technical data relate to the unladen weight (DIN)
1) According to guideline 93/93/EWG with all fluids, fuelled with at least 90% of usable tank volume
2) Unladen weight without fluids
ęCopyright 2009-2012, ApniBike.com, All rights reserved.
Web Design and Development by MechTechnologies